North America

• Region: Gulf of Mexico
• Date: Feb, 2022

W&T Offshore, Inc., an independent oil and natural gas producer, has closed its acquisition of oil and gas producing properties in federal shallow waters in the central region of the Gulf of Mexico from privately-held ANKOR E&P Holdings Corporation and KOA Energy LP.

The assets are located in the Ship Shoal 230, South Marsh Island 27/Vermilion 191, and South Marsh Island 73 fields. After normal and customary post-effective date adjustments, cash consideration of approximately US$30.2mn was paid to the sellers using cash on hand.

The acquisition will add internally-estimated proved reserves of 5.5 million barrels of oil equivalent (Boe) (69% oil) and proved and probable, or 2P, reserves of 7.6 million Boe (75% oil).

It will add more than 50 gross producing wells (average working interest of 80%) across three shallow water fields to the company’s working interests in 41 producing fields. In such a developed field many of these assets will likely be closing in on their twilight years, presenting an opportunity for well intervention service providers to maintain their production rates and extend their life-span.

Tracy W. Krohn, Chairman and Chief Executive Officer, commented, “Now that we’ve closed the transaction, we’ll begin working on realising the synergies we’ve identified and maximising the value of these assets. We will continue to seek other accretive transactions that can further enhance shareholder value.”

• Region: Gulf of Mexico
• Date: Jan, 2022

As it approaches the five-year anniversary of its first contract with PRT Offshore, Interventek Subsea Engineering has announced that it is shipping out their latest Revolution in-riser safety valve order.

This is for a new 4-1/8” 10,000psi, shear-seal valve, designed for slimline well access with an outer diameter of 15-1/8.

The slimline Revolution valve is the first of its kind and reflects a growing need for technology which is easily scalable to suit the individual challenges of different subsea intervention projects. Like all Interventek’s products, it has undergone extensive testing and meets the latest API 17G industry standards.

The valve will be used for intervention operations in the Gulf of Mexico in more than 2,450 m (8,000 ft) depth of water with an integral intervention arrangement, using a surface BOP for well control with direct vertical well access to the wet xmas trees below. The Interventek slimline valve will be used in conjunction with this arrangement to enable safe and efficient well access.

PRT Offshore already have an impressive fleet of eight additional Interventek Revolution valves in service, which have built up an extensive track record of deployments in the GOM over the last few years.

• Region: Gulf of Mexico
• Date: Dec, 2021

On the second day of the Offshore Well Intervention Gulf of Mexico 2021 conference, attention turned to technology and operational excellence and plug and abandonment, before attendees were exposed to a number of in-depth case studies.

As chairman for the second day of the conference, Nathan Wolford, Project Manager at C-Innovation, opened the proceedings by noting that in this modern world it is easy to take energy for granted. “Covid-19 saw a collapse in demand for energy products, but it got better and in 2021 we are rebounding in our energy consumption and forecasts expect that we will meet or exceed the 2019 levels (highest historical levels to date). By 2040 the forecast the energy demand will increase by 30%.

“83% of energy worldwide is derived from fossil fuels and oil is the biggest of this. As oil producers and service companies, the good news is oil and gas is the dominant worldwide energy source and will continue to be for the foreseeable future. Demand will increase by 30% over next three years, so in some ways we have an obligation to create more production and more energy.

“So we going to have to find more efficient ways to increase existing production through production enhancement mechanisms, and find safe and efficient ways to P&A ageing wells and fields and continue to develop technologies to gain efficiencies on these.”

Over the course of the day, this speakers and attendees demonstrated that they clearly had an intention to do so.

For example, one notable highlight was Zach Bruton’s presentation on the solutions that Baker Hughes has in their toolbox for use in the GOM. The Growth Lead for North America Subsea at Baker Hughes outlined the agnostic and modular tooling design programme that they have developed, introducing the Tree Retrieval Tool and the Tubing Hanger Retrieval Tool before discussing passive well monitoring technology and its possible applications in the region. The session, titled ‘Optimising Asset Retirement Through Agnostic Technologies’ was concluded with a case study from the UK and received a good reception from the audience - interest was demonstrated by the many questions that were directed towards Bruton.

Following this session with another equally engaging demonstration by Christopher Thompson, VP of Business Development at United Subsea Specialists. This young company is committed to delivering equipment to reduce critical path time, cost of operations and risk for operators. Thompson presented several innovative solutions his company has brought to the market, such as their 350t-750t Wire Line Frames, which is enabling them to achieve this commitment.

The plug and abandonment section of the day was kicked off with a panel discussion featuring representatives from Chevron, Schlumberger and Welltec. The experts explored the different types of P&A being executed within the GOM before focusing on the value that can be achieved from performing P&A from a dedicated well intervention vessel as opposed to a rig.

The last point of call was turning to case studies which, as the final section of the conference, were last but certainly not least. Highlights here included a presentation from Bruce Trader, President of MADCON Corporation, who reviewed the development and design of the Structural Composite Retrofit (SCR) Process which restores structural integrity and provides long term corrosion protection to severely corroded or damaged conductors and well casings. Trader presented a number of case studies on the SCR Process and noted that, to date, it has been used to restore the original design capacity and provide long term corrosion protection to hundreds of wells.

The final session of the conference was an engaging presentation from Welltec and Wellgrab AS on replacing conventional heavy fishing methods with light controllable intelligent tools. Garry Andrews, Senior Business Development Manager at Welltec described the solutions that Welltec provides for fishing operations, such as the Well Stoker and the Welltec’s Release Device (WRD), touched on why E-line is preferable over the convention heavy means, outlined some related case studies and finally discussed the Wellgrab AS and Welltec collaboration. Geir Magne Mo Johnsen, Founder and COO of Wellgrab AS followed this by demonstrated the capabilities of its digital well intervention robot which can be converted to fish anything inside or outside a well. The versatility and adaptability of this tool means that this is the only tool Wellgrab AS has in its tool suite.

Each session was sandwiched by networking drinks which allowed attendees, for one of the first times in nearly two years, to meet face-to-face, discuss and potentially formulate partnerships and business propositions for the future. The entertaining conference concluded with a view to returning again in the next year, hopefully when the world has made even more progress along the exhausting road to recovery.

• Region: Gulf of Mexico
• Date: Dec, 2021

Returning live and in-person, the Offshore Well Intervention Gulf of Mexico 2021 conference treated assembled industry stakeholders to an informative two-day exploration of the state of well intervention in the region and examined the technology and best practices which have the potential to shape campaigns of the future.

Jim Maher, President of Trendsetter Vulcan Offshore (TVO) who co-chaired day one of OWI GOM 2021, opened the conference by noting his delight at finally being able to speak to everyone in person and emphasised that “times of great dislocation, which these clearly have been, are often the times where most innovation comes to the fore.

“As the market recovers, the intervention technologies are among the most viable as they are the closest approximation to short cycle. As we start going again, intervention technologies are certainly going to be among the most competitive for the capital available.”

Following this, over the course of the next two days, attendees were treated to a banquet of engaging sessions featuring presentations and discussions from the most influential service providers, operators, consultants, and more.

BP lead a panel discussion on how the company achieved optimal results on its ongoing RLWI campaign (which began two years ago) and the challenges it has faced and how they will continue to overcome them. Representatives from C-Innovation, Halliburton and JDR Cable Systems joined the discussion and together they explored the innovative tools, equipment and technology which could be deployed in order to achieve the most efficient intervention campaigns.

The implementation of new technology was one of the conference’s clear themes, which Charles Brooks, Technical Sales Representative from Interwell, heavily leaned into as he presented on the Interwell Barrier Verification System. This market-leading barrier assurance tool provides, as demonstrated by a case study from the GOM, time efficiency, confident and correct verification of well barrier and integrity, the ability to reduce tensile stress from pressure from pressure testing from surface (especially in fragile well constructions) and more. This solution was quoted as the most extensive downhole barrier verification the operator has performed in the region, proving its quality.

Maxim Volkov, Principal Domain Champion at TGT Diagnostics, followed closely on Brooks’ heels by introducing the Sand Flow product which precisely locates sand entry to the wellbore and provides a qualitative sand count, indentifying problem zones to help combat the serious issue of sand production. Through the use of case studies, Volkov demonstrated how the Sand Flow product, when used in tandem with Tendeka’s Filtrex solution, can localise target and fix sand issues affecting wellbores to ensure productivity is restored and integrity is maintained.

Not to be left out, Archer joined the party as Kevin Squyres, Sales and Service Delivery Manager, demonstrated the capabilities of the Stronghold Barricade, Defender and THOR solutions which can eliminate the need for milling, providing an effective alternative to traditional methods of plug and abandonment.

While new technology can bring value, it is also important to understand and asses the risk of incorporating it into intervention campaigns. This topic was covered in detail by industry experts from Schlumberger, United Subsea Specialists, Chevron and CRG Oilfield Abandonment LLC at the session focused on intervention technologies for existing field uplift.

In the following sessions on day one the sessions were dedicated to:

• Understanding the considerations when evaluating different intervention philosophies and technologies. A Baker Hughes presentation highlighted that light well intervention can achieve substantial benefits such as 55% total emissions reductions (when compared to a rig-based operation) as well as cost-saving incentives.

• The consolidation of well opportunities, where representatives from Trendsetter Engineering, BP, MADCON and TGT Diagnostics presented case studies of campaigns that have increased production and extended the profitable life span of wells as well as explored the future opportunities presented by LWI, HWO and coiled tubing technologies.

• Considering lifecycle completion. Shell, BP, PRT Offshore and Welltec associates discussed the completion design considerations; new completion and well technologies which could have an impact on the future well intervention scope; and how regional operating environment influences operations view’s on new well programmes.

• The successful application of real-time enabled coiled tubing for abandonment of a deviated well with complex anomalies. Ed Adams, Customer Engagement Coordinator at Schlumberger showcased a case study on a tricky well which was causing issues for the operator. Schlumberger deployed the ACTive CCL to detect tubing anomalies and implemented a number of solutions to return the well to safe state which was all done in days before hurricane Elsa entered the GOM.

The day was closed with a brief review of the enormous amount of material that was covered with topics such as marketing dynamics, creating value in well intervention and technology and operation considerations in particularly standing out. Before the attendees retired to the networking drinks, they looked ahead to day two and the exciting subjects that were yet to be explored.

• Region: All
• Date: Nov, 2021

Helix Energy Solutions Group, Inc, an international offshore energy services company, has joined Trendsetter Engineering, Inc. in a global partnership to provide integrated hydraulic intervention services for subsea wells and flowlines.

The new partnership will integrate Trendsetter’s 15,0000 psi Subsea Tree Injection Manifold (15K STIM) and experienced personnel into Helix’s state-of-the-art fleet of well intervention vessels including the Q4000, Q5000, Q7000, the Seawell, the Well Enhancer as well as two chartered monohull vessels; the Siem Helix 1 and the Siem Helix 2.

Mike Cargol, VP of Rentals and Services for Trendsetter Engineering, commented, “This collaboration with Helix allows us to streamline contracting, improve operational efficiency and mitigate the operational and financial risks typically associated with hydraulic intervention operations. Although the initial focus is hydraulic intervention, we are excited about what the future holds for Helix and Trendsetter and look forward to collaborating further in order to provide additional value-added services to our clients.”

Jonathan Rourke, General Manager of Helix’s Subsea Systems Intervention Group, added, “We are delighted to have reached this agreement with Trendsetter Engineering, representing a collaboration between two industry leaders with expertise, experience and capabilities in the global well intervention market. This partnership will expand Helix’s intervention capabilities to further provide cost-effective and efficient alternative solutions to our end clients, and further reduce financial risks.”

• Region: Gulf of Mexico
• Date: Oct, 2021

For the 7th edition of the Offshore Well Intervention Conference Gulf of Mexico, focus is turning to well intervention optimisation through innovative technologies in order to build a best-in-class workover strategy that suits the changing market.

Bhargava Ram Gundemoni, Global Solutions Specialist at 3M, presented at the OWI GOM virtual webinar in the lead up to the conference and revealed how his company’s innovative solution, the Ceramic Sand Control system, can allow operators to enhance their oil and gas production and increase productivity and profitability, ensuring a reasonable balance between OPEX and EOR to create value and yield.

Ram showcased field proven Ceramic Sand Screens technology with three case studies, revealing how different operators achieved a simplified sand control and the general key performance drivers in sand control selection by reducing equipment and personnel footprint, risk reduction to enhance safety and durability and finally, operational excellence - for increased productivity and increased return on investments.

Challenges and current market needs

The general market needs are to increase productivity for less cost and achieve less risk. Traditional practices used for the Sand Control Selection (SCS) process are based on mature technologies and methodologies that often fail to meet the key performance drivers. Mature technologies often rely on a metallic filter media which is used as the mechanical sand control barrier downhole. Metallics filter media metrologically has erosion limits that constrict the boundary condition of hydrocarbon productivity. If a more erosion resistant filter material can be utilised, the upper safe operational window can be extended limiting the risk of erosional failure and hot spotting of the downhole sand control system whilst optimising asset recovery where possible. In addition, offering greater longevity to downhole sand control through a material change reduces the reported millions of dollars companies employ in repairing wells with failed sand control.

Disrupting the traditional sand control approach

The solution is a change of metallic filter media to ceramic filter media of the screen. This has been achieved by integrating a full-body ceramic part in the form of rings on a pre-perforated base pipe on to which ceramic rings are stacked and hold with two end caps and with an external shroud on top. The stack of ceramic rings creates a slot opening which is designed for the application spec-in and the ceramic material at the inflow offers erosion resistance and therefore mitigating the hotspotting potential ‒ allowing the operator a wider operating window of productivity.

Ceramic Sand Screens have been proved by deployment in the industry both in green fields and in intervention wells, delivering operators operational simplicity, Reduced HSE Risk at lower Capex delivering higher productivity. In some cases, Ceramic Sand Screens has been an enabling technology to unlock production potential with faster return on investments.

Standardised field-wide approach with simplified stand-alone screen sand control

Ceramic Sand Screens unlocks the operator methodology to achieve a simplified and standardised sand control approach in wide range of reservoir conditions and well architecture as downhole sand control system in OH, cased hole on a rig or through tubing rigless applications. Ceramic Sand Screens have been deployed and delivered success in 120+ applications with homogenous, heterogeneous, well-sorted to poorly sorted, low to high fines reservoir of sand properties.

Ceramic Sand Screens are being utilised as an asset wide standard solution to stop proppant flow back in a stimulated well completion.

To learn more about this solution and the advantages it can offer for operators, Offshore Network sat down for an in-depth chat with Ram:

How does ceramic sand screen add value to hydraulic stimulated wells?
“In a hydraulic frac stimulated well completion method, proppant flow back is a challenge. If this is not controlled results in erosion of tubulars, Health Safety and Environment (HSE) issues to potential leak eventually leading to spills. Operators also face economical losses due to prolonged clean up phase post stimulation (additional rig cost due to stand-by) and increased erosion risk to the well jewellery during clean-up. The Ceramic Sand Screens offer an economical approach to dealing with proppant flowback either using rig or rigless deployment methodology.”

“We are offering the opportunity to deal with proppant mitigating the need of resin-coated gravel and in some instances need of gravel packing in stimulated wells. With our solution, the operator has flexibility to use a rigless approach to stimulate/ frac the required zone and then run ceramic sand screens on wireline/ slickline to set across the stimulated zone. The ceramic material is extremely hard in nature offering high resistance to hotspotting and erosion caused by high strength proppant material. This will protect against proppant production topside and restrict equipment from being damaged higher up. In addition to cost-saving and HSE benefits, much less energy is required for deployment, which means the operator leaves less of a carbon footprint by reducing the need of rig."

How this technology can be further utilised in conventional sand control applications by operators to gain value and unlock production potential from their existing standard well stock?
“Not only in stimulated wells, but ceramic sand screens have also extended the traditional operational envelope of ‘Stand-a-Alone’ screen application, proven in unconsolidated sandstone formation. This technology has enabled operators to unlock production potential utilisng less complex rigless deployment technique. There are many wells globally shut-in due to traditional primary sand control failures. Many thin bed reservoirs which are left behind the casing are uneconomic using a rig-based approach. Simplified Sand control methodology with Ceramic Screens can add additional cumulative hydrocarbon production from the existing well stock via an economic satisfied solution.”

Focusing on the upcoming OWI GOM conference, could you explain what operators in USA can take away from this technology to add value to their oil and gas producer fields in Gulf of Mexico?
“In the Gulf of Mexico, operators can adapt their approach with this enabling proven technology to add incremental value to their assets. This approach fits in nicely with the energy trends in the industry, especially in particular the industry thirst in looking at more effective way to address the challenges of ensuring operational excellence. Our solution is simple, flexible, can be implemented rig or rigless and can still yield high productivity proven globally.”

As of 29 September 2021, 3M has completed 121 installations for sand control with users globally consisting of 50% oil producers and 50% gas producers. The product also been qualified in alignment to ISO 17824 / API 19SS Standards.

To learn more about Ceramic Sand Screens, visit https://www.3m.com/3M/en_US/oil-and-gas-us/ceramic-sand-screens/

If interested in such a simplified solution to unlock the production potential assets by addressing sand control challenges, contact Bhargava Ram Gundemoni: This email address is being protected from spambots. You need JavaScript enabled to view it.

• Region: All
• Date: Oct, 2021

To best meet customer needs, you must be a solution provider, not just a product provider. Parker LORD’s attitude is, and has always been, to collaborate with customers to find an approach that meets their needs quickly and easily.

They have proven this mindset yet again by finding a better process for working with customers on gimbal assembly design.

Parker LORD gimbal pads and assemblies for offshore oil rigs and intervention vessels are designed under strict process and quality controls to ensure each part performs consistently. They can accurately and dynamically model the stiffness of any gimbal system in any plane of rotation. A step beyond competitors, this new tool incorporates feedback from customers in real time to create tailored solutions. The result is a product designed to handle extreme loading and environmental conditions for improved pad life.

The flexible design tool introduces a process unprecedented for the oil and gas industry, creating solutions through working closely with the customer, instead of only using existing catalog parts. Traditionally, the customer and supplier might have limited interaction during the ordering process. Using this flexible design tool, placing an order becomes a collaborative partnership where Parker LORD engineers and the customer work together to solve problems. Additionally, the tool can accommodate design changes dynamically, allowing for multiple design versions.

To make this work, the first things Parker LORD want to know about a customer’s gimbal assembly is how it is intended to be used, the range of expected limitations and the maximum stiffness needed. From there they work together to produce a solution.

In one example, this fast-moving live design process allowed them to identify, analyse and quote four different systems as the project scope changed over a three-week period. The customer was struggling with how to add a much-needed gimbal assembly to an existing bid and through these conversations they created a solution that was within budget.

The design tool allows system level rotational stiffness calculations in any direction. This graph below shows the relative pad positions and corresponding system rotational stiffness in each plane from center. Asymmetric, or non-uniform spacing can also be evaluated using this tool. 

It takes innovation to work on a solution. Sometimes the solutions can involve renting a part instead of buying it or designing a part to specifications that will then bring it into budget. The market collapse is forcing rig and vessel operators to think differently. Flexibility and elegance around the design are now key.

Fill out this form and a member of Parker LORD’s engineering team will contact you to talk through how their flexible design tool can help you when ordering your next gimbal assembly.

Learn more about the new Parker LORD flexible design tool at https://www.lord.com/industries/oil-and-gas/offshore/drilling-rigs/gimbal-bearing-assemblies-and-pads

• Region: All
• Date: Oct, 2021

Jonathan Owens, Director Oil and Gas Division, Parker LORD, explains why oil and gas companies are turning to well intervention to maintain production levels and the new technologies entering the market to facilitate this.

With thousands of subsea wells around the world, the task of staying efficient remains challenging. Using deepwater well intervention systems, oil and gas companies can obtain higher profits from under-performing wells, a needed option with today’s oil price fluctuations and profit-focused environment. The COVID-19 pandemic and the resultant decreased demand has brought extra challenges to develop methods to keep wells as efficient as possible, while minimizing capital investment.

Many wells are 20–30 years old and are operating at decreased production rates. To keep maintenance costs in check, operators are turning to well intervention to extend the productive life of aging wells and to repair damaged or underperforming wells.

New systems continue to be developed to keep the industry operating with increased efficiency.

Quick Design Gimbal Assemblies

Gimbal pads and assemblies, located beneath the spider on offshore rigs, provide the necessary compliance between the riser system and vessel to protect drilling equipment from excessive stress and fatigue damage. Parker LORD gimbal pads are designed under strict process and quality controls to ensure each part performs consistently. The resulting product is designed to handle extreme loading and environmental conditions for improved pad life.

An innovative and flexible design tool is available that can quickly generate a new bespoke gimbal assembly design. This tool calculates the system level performance of the gimbal in real time with regards to stiffness, weight, size, and can even tailor stiffness in certain directions. Using this tool, a new design can be produced in just minutes or hours to meet customer needs. Previously it could take weeks to months to produce a design. This process is a dramatic step-change versus what has traditionally been available to the offshore industry – creating customizable gimbal solutions rather than just offering standard products that might not adequately solve the problem.

To make this work, it is important to know how a customer’s gimbal assembly is used, what the limitations are, and the maximum stiffness needed. From there, while working collaboratively with the customer and their constraints, the flexible design tool can outline a solution and identify system trade-offs early in the design process.

As an example, this fast-moving live design process allowed for rapid identification, analysis and quoting on four or five different gimbal systems for a customer as the scope continuously changed over a period of three weeks. The customer was struggling with how to afford the gimbal assembly and through these conversations a solution could be created that was within budget in addition to meeting their technical requirements.

Intervention System Flexible Joints

An important option when maintaining a deepwater well is to use an intervention system flexible joint. It is a softer, more flexible stiffness transition versus the traditional tapered stress joints. In deepwater operations, a flexible joint allows a lower bending moment at the wellhead, so it works well in rougher weather and more dynamic sea states.

To use an intervention system flexible joint with an existing riser system, simply bolt the mating flange on and it will attach to the existing system. The flexible joint provides pressure containment redundancy with a separate seal bearing and load bearing. It improves reliability over a single-bearing design. The seal bearing is optimized for high-pressure containment and fluid resistance. An integrated pressure transducer provides a full-time condition-monitoring system that provides an alert when the first barrier is damaged so appropriate actions can be taken. This failsafe is unavailable on a stress joint or a conventional flexible joint.

In the event of a drive-off or drift-off scenario, a flexible joint in the riser system allows the vessel a wider range of motion without excessive bending of the riser. A flexible joint allows for the critical unlatching at the wellhead even at 10 degrees offset.

Our approach to intervention riser flexible joints has been field proven in basins including Brazil, the North Sea, and West Africa. Over the past four years, Helix Energy Solutions has adopted our intervention system flexible joints on a number of vessels, including the Q7000, the Siem II and the Well Enhancer.

With our product well established in the deepwater intervention space, we have recently found a new application in the newly emerging deepwater mining sector. Working closely with a new customer, we have made slight modifications to the existing flexible joint design to accommodate the requirements of DNVGL RP0034 (Steel Forgings for Subsea Applications - Technical Requirements) and are actively working towards the delivery of our next two flex joints for a subsea mining application slated for 2022.

As the economy continues to struggle, it’s necessary to look to intervention systems to make deep water wells more efficient and productive.

• Region: All
• Date: Oct, 2021

The Parker LORD Noise, Vibration and Harshness Division of Parker Hannifin Corporation, the global leader in motion and control technologies, has developed a proprietary flexible design tool that quickly and easily provides new gimbal assembly designs for offshore oil rigs and intervention vessels.

Parker LORD gimbal pads and assemblies are designed under strict process and quality controls to ensure each part performs consistently. Parker LORD engineers can accurately and dynamically model the stiffness of any gimbal system in any plane of rotation. Using the new flexible design tool, they can now provide a new gimbal assembly design – specifically for the customer’s needs – in minutes or hours instead of the weeks or months previously required.

“We provide innovative solutions by listening to our customers and leveraging nearly a century of experience,” said Scott Reinbold, Lead Engineer, Parker LORD and Designer of the tool. “Our ability to customize offshore oilfield solutions using new tools and capabilities raises the bar and changes expectations. Previously, it was unheard of to be able to make changes on the fly. With this new tool we can collaborate with customers and update designs in real time to adapt to changing project parameters.”

The flexible design tool introduces a process that is unprecedented for the oil and gas industry, creating solutions through working closely with the customer, rather than only using existing catalog parts. Traditionally, the customer and supplier might have limited interaction during the ordering process. Using this flexible design tool, placing an order becomes a collaborative partnership where Parker LORD engineers and the customer work together to solve problems. Additionally, the tool can accommodate design changes dynamically, allowing for multiple design versions.

The gimbal assembly design process considers all aspects of the part including angles, planes of rotation and elastomer selection. The resulting reduction in design time will help to lower costs, reduce maintenance and increase safety.

Once the design is finalized, Parker LORD can use advanced modeling techniques to predict the gimbal system performance characteristics and provide a safe operating envelope for various angles and loads, enabling the end user to optimize operations offshore.

Learn more about the new Parker LORD flexible design tool at https://www.lord.com/industries/oil-and-gas/offshore/drilling-rigs/gimbal-bearing-assemblies-and-pads

• Region: All
• Date: Sept, 2021

Maggie Demicco, Manager of Business Development & Product Management at Parker LORD, sat down with Offshore Network to discuss how the company’s flexible joint product line, a solution typically reserved for drilling applications, is bringing value to the well intervention market.

While engineers at Parker LORD have predominantly focused their efforts on drilling applications (with products such as telescopic joint packers which are all certified and fielded on many rigs around the world), Demicco described how the company has ventured into the well intervention market, spearheaded by their flexible joint solution. Demicco stated, “This really came about by accident in some ways. Flexible joints are very common in drilling applications but had not been used in intervention applications.

“This particular unique application has a high pressure rating, higher than most flexible joints used in drilling applications. We also envisioned a solution that was compact as intervention vessels are smaller than drilling rigs and this is why it is helpful to have the flexible joint 2 metres high or less as opposed to say 5 metres or more for a stress joint. In doing so you are able to handle higher pressures with a more compact package in that case."

Demicco also described how, with flexible joints installed at the top, operators impart less of a moment on the entire riser system. Flexible joints accommodate any angular offset, much like a ball joint, so less moment is imparted into vessel structure and riser. This allows for benefits such as being able to operate more on the edge of where you could before with a stress joint, such as further off station or in rougher weather.

So far, Helix has fielded three units of this solution, the first two went into service as early as 2017, the third in 2018, and it is also being utilised in a subsea mining application, to enter service next year.

Unlocking value in challenging environments

While the flexible joint can bring benefits in the form of cost saving and safety benefits HSE, it also opens up new opportunities for operators and service providers which were previously restricted by stress joints.

For instance, Demicco commented, “If you have an intervention vessel or rig doing riser-based interventions in deeper water, say 900 metres or more, you’ve got a longer riser and that inherently is more flexible by being longer. In such applications there is less of a need for flexible joints. But if you are in shallower water like 300 metres or less, the riser is a lot shorter so it is more rigid in nature. If you have a stiffer riser system, you put more stress into the wellhead itself at the bottom and into the vessel at the top. In that case flexible joints can provide a lot more benefit with those shorter, stiffer risers if installed at the top and the bottom.”

Demicco added that the flexible joints are even more beneficial when placed at the top and bottom of a riser. Such an advantage could be incredibly useful in regions such as the North Sea which does not only have shallower waters but also rougher sea conditions and a lot of very old wellheads which have undergone multiple interventions over the years. Demicco noted, “Having a flexible joint here would help reduce the stress when you’ve got older wellheads you don’t want to replace, ensuring the field will keep producing.”

While companies such have Helix have not yet incorporated this, Parker LORD sees this as the next step which could provide even more flexibility to potentially expand operation limits even further.

Safety first

At Parker LORD, HSE is considered paramount and reducing risk is inherent in the solutions they offer, as is the case in the flexible joint.

Demicco noted, “One feature of our flexible joint is that it has two separate flexible elements, based on the different way we approach flexible joint design. One flexible element is doing the work of a seal bearing, sealing against intervention fluids. The other one is designed to handle the riser loads and the bending moments. However, while each is designed to do its primary function, if something was to happen, and a seal bearing were to fail, you have the load bearing as a secondary sealing mechanism.

“There is also a sensor between the two barriers to measure the pressure in the cavity which should read as zero in normal operations. If the pressure increases in that cavity, it the sensor will alert you if a failure has happened in the seal bearing, and then you can change it out when you have a convenient opportunity in operations. We consider that a dual barrier, a belt and suspender approach.”

Other solutions on offer

Also on the menu for well intervention operations are Parker LORD’s customisable Gimbal Bearing Assemblies, which, as Demicco outlined, have a similar story in that they were in use on drilling rigs. These are used while running a riser, below the spider and accommodate the vessel motion and support the load of the riser along with whatever equipment is connected.

Demicco said, “If you want to have a Gimbal on an intervention vessel you are often constrained on space so you can’t use an extremely large and stiff 72 inch 1.8 metres wide Gimbal in that case. This is another story where we took a product successful in drilling applications and modified it for an intervention application. Whether more space constrained, required lower stiffness, or the angles are different from drilling application, our engineer from that product line came up with ingenious design tool to take customer inputs for each application and quickly revise the equipment to adjust the parameters on the fly with for the customer.”

Opportunity on the horizon

Demicco added that the company is continuing to explore solutions across the sector, including within the well intervention space. She said, “We know how to design elastomer parts and mitigate shock and vibration. We are talking to customers to find out what their big issues are in those spaces and we typically try and target the problems other people can’t solve, have failed to solve, or unwilling to solve for whatever reason. When we talk to customers about their problems we are asking: Is there some elastomer product that’s failing too quickly and you want to extend the life or are you trying to solve a problem in a non-elastomer way? Is there some other solution we can design using elastomer to solve the problem?"

In regards to the flexible joint, Demicco added that the next step is to get this more widespread, as the hard work has been done. “We have set up this market-based product and the big initial step and cost (getting the mould to manufacture the moulded flexible elements) has been taken. We’ve got that and once we’ve validated that design to the API standard, established our manufacturing processes, that’s really the most important thing. After that it is easier to modify and package those flexible elements differently depending on the customer application. We have the mould, have capacity on the equipment, now just a matter of finding people willing to adopt it and working with them to make modest tweaks to suit their application.”

Maggie Demicco handles Product Management and Business Development for the Oil & Gas business unit of Parker LORD. She holds a B.S. in Mechanical Engineering from Brown University and a Master of Business Administration degree from Babson College.

• Region: All
• Date: Sept, 2021

At OWI EU Jonathan Owens, Director, Oil and Gas at Parker LORD, sat down for a virtual fireside chat with Neil Greig, Sales Manager at Helix, to discuss the blossoming relationship that has emerged between the two companies in recent years, culminated by Helix’s use of flexible joints, designed and manufactured by Parker LORD.

Owens opened the discussion by explaining how the relationship between the two companies began when, in 2017, Helix started implementing its Integrated Tension Frame (ITF) onto a number of its vessels. With this step, the company soon discovered that the frame required more flexibility and approached Parker LORD for a solution for their Siem Helix 2 vessel which was operating in Brazil and the Well Enhancer in the UK.

Going into more detail, Greig explained that across their assets they faced a challenge of sheer loading rather than bending. For the Well Enhancer, they developed a system to allow risers to run in relatively shallow depths (80m-200m) ‒ a compensated coil tubing lift frame or dynamic lift frame. This had two integral pistons forming part of the compensation system which worked to an extent but encountered issues with seal designs in the system and potential twisting of the frame due to side loading. A side effect of this was wear inside the pistons which ultimately resulted in the system not moving smoothly and a crabbing effect.

To mitigate these issues, Helix shortened the frame, rigidised it and replaced the two pistons with a single cylinder above, reducing the potential two fail points to one. Despite noticeable improvements, this was still not enough and it was at this point that the company decided to approach Parker LORD who advised the introduction of a flex joint to the system. Sitting just below the frame, this reduced the side loads going into it, everything moved in a smooth linear fashion and, after post job analysis, there was no sign of wear.

Owens took over and noted that additional, “Flexible joints at the top and bottom of a riser on a drilling rig and for diverter flexible joints are very common in drilling to reduce the side loads on the wellhead and accommodate being offset from the drill centre but is not so common on the intervention side. Typically stress joints are relied on for transition. The challenge with an intervention riser versus a drilling riser is obviously higher pressures, small footprints to bear the load of the riser weights, and intervention fluids like solvents.”

“So what we did was divide the work of the two flex elements, one called the load bearing, a flex element, to take the axial load and the fatigue aspects of the work; the seal bearing on the ID is a smaller flex element to handle the pressure and the intervention fluids. One advantage of doing that is we created a redundancy in the system because the pressure housing and the load bearing can take the 10,000psi operation pressure too, so you get a dual-barrier system.

Greig added, “The key point is that instead of using a stress joint which have to effectively be bespoke depending on well conditions, water depths, etc, the flexible joint has a wider range of operations without adjustments which makes it a more cost efficient option."

Entering shallow waters

The two speakers noted that with regions such as the North Sea, shallower waters makes it a much more challenging environment for riser-based well intervention operations and fatigue sensitive wellheads are often a key issue.

But adding flexible joints to the top and bottom of the riser, as Owens demonstrated, helps with the stiffness transition and reduces the loading onto the wellhead to avoid some of the challenging situations such operations can pose.

Greig said, “We certainly will rely on the flexible joint for the upper section as a practical solution to countering those high sheer forces and bending forces. In such environments everything is highly utilised so whatever solution you have in place it is critical you get it right. The flexible joint protects this equipment with the topside one and there is similar argument that you would be protecting the equipment subsea with the lower one. In deep water, such as 1300m, things are a lot more forgiving but it is a much more critical situation at 85m and we certainly wouldn’t be able to entertain them without the flex joint in the system.”

Ensuring safe operations

Following the discussion, Offshore Network spoke to Craig Tennant, Engineering Manager ‒ Riser Systems at Helix Energy Solutions for more on the company’s relationship with Parker LORD and the improvements the flexible joint has brought to their operations.

Tennant commented, “The flexible joint allowed for a small but useful increase in operating envelopes which allowed for safe operations. This is especially important for a failure scenario to ensure we can disconnect the riser before the vessel drifts off station and exceeds allowable structural limits.”

“We use the flexible joint for riser-based operations on the Q7000 and Well Enhancer with a similar set up to the Siem Helix vessels. The addition of the flexible joint on the Well Enhancer has reduced the transfer of loads into the Coiled Tubing Lift Frame with the aim to minimise bending stresses within the frame.”

On the solution opening opportunities in shallower waters, Tennant said, “Introducing a flexible joint alleviates the high reaction forces resisted at surface and improves our working envelope using the existing equipment. The flexible joint is one part of a suite of components and practices that allow us to achieve shallow water operations. Shallow water operations open up riser-based operations where previously only open water wireline operations were available. These are generally located around coastal UK, i.e. central North Sea, but open up potential worldwide such as Brazil and Australia.”

Tennant noted that his company have a campaign planned with Cooper Energy in 2022/2023 in Australia where the Q7000 vessel, with flexible joints on board, will be deployed. He added that it is likely that they will also be operating with riser-based systems in the North Sea next year with the flexible joint as an integral part of the riser stack.

• Region: All
• Date: July, 2021

Halliburton has launched ExpressFiber, a single-use fibre optic cable that offers accurate, direct subsurface measurements, including cross-well communication, at a price point that enables fracture monitoring on every well pad.

Understanding and optimising well and fracture interference is a significant challenge that operators face today. ExpressFiber uses distributed acoustic sensing (DAS) to acquire a direct measurement of micro seismic, strain, and temperature unlike other cross-well monitoring techniques that provide indirect estimates.

ExpressFiber, paired with Halliburton’s intelligent fracturing and subsurface monitoring services, provides real-time actionable insights of fracture growth and well interference, allowing operators to improve completions designs and gain overall capital efficiency. It can be pumped downhole in offset wells within a couple of hours, and can be installed any time before or during the fracturing operation. ExpressFiber is designed to withstand downhole conditions for the duration of the stimulation treatment before degrading, and has no impact to subsequent fracturing operations in offset wellbores.

Michael Segura, Vice-President of Production Enhancement, commented, “When it comes to direct measurement of the subsurface, fibre is the most direct and trusted sensor of choice, but traditionally it has been expensive and complex to install. Our innovative fibre portfolio transforms fracture monitoring from an application reserved for science wells to a routine solution for regular use on more wells across your asset.”

Through a five-year agreement for North America unconventionals, ExpressFiber will be enabled by FiberLine Intervention (FLI), a wellbore surveying technique from Well-SENSE Technology Limited.